Unfog is a guide that explains how to downgrade Chromebooks even after if it was affected by The Fog. It was found by a user on Discord named @olyb and was told to me on October 1st, 2023.
First, you'll need to unplug everything in the Chromebook, such as the charger, any USB devices, etc.
Take your screwdriver and open the back panel of your Chromebook.
Find the battery cable and unplug it from the Chromebook, this should disable the Write Protection on the majority of Chromebooks. If not, search up what your WP method for your Chromebook is online.
An example of the battery connector location is shown below:
Plug in the charger, and turn on the Chromebook. Yes, this will work as the Chromebook will run from the power of the charger.
On some Chromebooks such as DEDEDE, you will need to jump two pins to disable WP. You can easily do this by taking out the motherboard and using a paperclip to jump the two.This is the case for you if WP doesn't disable after unplugging the battery.
If the Chromebook fails to boot from the charger because it bootloops at the developer mode screen, hold Power (⏻) + Reload (↻) + ESC till you're at the recovery screen to continue to the next step.
Boot into SH1mmer or RecoMod and then enter the "Bash Shell". You cannot do this in ChromeOS due to the last command.
In the Bash Shell, execute the following commands below:
The commands should report "success" at the end like this image:
Exit SH1mmer (or RecoMod) and turn off your Chromebook. Unplug everything including the charger, reconnect the battery, and then reconnect the charger.
After the Chromebook is powerwashed (as it disables devmode when doing this), the Chromebook should now be able to install any ChromeOS version without showing the "out-of-date" error.
Typically you will only need to do this once and then be able to downgrade to out-of-date ChromeOS versions at any time, however:
There is a slight chance that when you update to a version past 111 (such as 112 and later), you may receive the out-of-date error again. To fix this, simply repeat the steps you did again in this guide.